Adding stop leak to radiator on dodge intrepid 2002

old marine

• 2426 Answers
• Posted on Feb 05, 2009

SOURCE: dodge intrepid 2002

The knock sensor is threaded into the block of the engine, just below where the cylinder head sits. You will need to remove the intake plenum (upper and lower) to access this part.

Dale Farr

• 78 Answers
• Posted on Mar 17, 2009

SOURCE: I need a time diagram of an 2002 dodge intrepid,

Hi there;

Here is a picture of the timing marks for the 2002 2.7L intrepid engine.


Hope this helps
Farrout!

SOURCE: Serpentine/drive belt routing diagram of a 2002 dodge Intrepid needed.

Try this web sight. http://www.dodgeintrepidchat.net/02lhe/

Marvin

• 85242 Answers
• Posted on Jul 25, 2009

SOURCE: how to repair the housing the upper radiator hose

it is not safe to repair this part, if it fails and you loose your coolant the engine is ruined very quickly from overheating, replace it.

SOURCE: 2002 Dodge Intrepid ES shift selector is stiff.

You have a shift cable. This cable may be getting a
little worn. One way to check it is, disconnect the
cable at the transmission and see if it is still stiff.
Look under the hood, just to the right of the brake
booster. You will see 2 cables that come through
the firewall, one is the throttle cable, it will go to the
right towards the center of the engine. The other is
the shift cable, it will go down to the transmission
linkage. Disconnect the cable there and see if it
shifts any easier. If not, replace the cable.
Hope this helps. Good luck.