How to replace evaporator on 2010 ford edge - Edge Ford Cars & Trucks

do you mean the door operating mechanism in the door or a door lock to this oldie ? if so its a doddle trust me just take it out complete ,if this vehicle is similar to a focus or a fusion one nut at back of door handle ? three on the lock and take it out complete with the anti theft shrouds the lot .simple

Yes. The only filter in the fuel line is now in the gas tank.
The last year for an exterior filter for most Ford models was 2005.

You mean cylinder location

1,2,3,
4,5,6,

on a v6 front to back

1&4 are at the motors front end

All you had to do was type:Ford Edge Cylinder Order
or whatever you want

remove caliper, rotor, caliper bracket, lower ball joint shaft and two strut bolts. remove bearing housing and any snap rings. remove old bearing. replace and repeat in reverse. watch the abs sensor! costly if damaged. This is not for beginners...

Take it to Portland Glass next time!

Can someone tell me where can i find the fan relay of a 2009 ford edge? Pls and thank you

under factory warr bring it to them

It is in your owners manual

Surely you have one, since the vehicle is
only a year old

You could remove the burnt one & read what it is !!

Try the horn fuse in the fuse box. Check the owners manual for instructions on where to look for it. There will be a metal U in the fuse... if it is broken in half and looks like there is black charing in the plastic, replace it. If the fuse is ok, take that bad boy to the dealership because it is a 2010 and most certainly has a warranty.

-Brian