SOURCE: I need a diagram for
Hello and welcome. here is a picture of the correct belt routing.
Testimonial: "Thank You"
SOURCE: serpentine belt diagram fo 03 chevy s10 4.3 ltr, v6
go to www.gates.com , click on the Parts Locator & Interchange link on the left, put in your vehicle information, after you have put in the engine size look below and find the serpintine belt for you application, ie. w/ac or w/o ac, click the camera icon and there is your routing diagram, hope this helps, let me know
SOURCE: i need a serpantine belt diagram for 2006 chevy
Click on the following direct Link. It has the Serpentine Belt Diagram that you will need.
SOURCE: diagram for drive belt replacement 2004 chevy
Check the next diagrams for 2004 Chevrolet Impala 3.8L SFI OHV 6cyl...
Fig. Serpentine drive belt routing-3.8L (VIN K) Engine
Removal & Installation - 3.8L Engine Hope helps with this.
Fig. Serpentine drive belt routing-3.8L (VIN 1) Engine (click for zoom)
L32 Engine
1. Rotate the drive belt tensioner using a 15-mm box end wrench on the pulley nut.
2. Remove the drive belt.
CAUTION
After the new drive belt is installed, make sure that the mark on the drive belt tensioner is within range, as indicated on the tensioner housing.
3. To install, lift or rotate the drive belt tensioner using a 15-mm box end wrench on the pulley nut.
4. Install the drive belt. Make sure the drive belt is properly routed. Make sure the drive belt tensioner is operating properly.
L67 Engine
The supercharged 3800 engine utilizes two drive belts. The outer drive belt drives the supercharger. The inner drive belt drives the following components:
Generator
Power steering pump
Water pump
Air conditioning compressor All driven accessories rigidly mount to the engine. Spring-loaded belt tensioners maintain the drive belt tension. Each drive belt has its own tensioner. A drive belt squeak, occurring when the engine starts or stops, is normal and has no effect on the durability of the drive belt. The drive belt tensioner can control the drive belt tension over a broad range of drive belt lengths, due to stretching. However, there are limits to the tensioner's compensation ability. Poor tension control and/or damage to the tensioner may occur after using the tensioner outside of its operating range. Replace the drive belt when this occurs.
1. Lift or rotate the supercharger drive belt tensioner using a 15 mm box end wrench on the pulley nut.
2. Remove the supercharger drive belt.
3. Lift or rotate the drive belt tensioner using a 15 mm box end wrench on the pulley nut.
4. Remove the drive belt.
5. To install, reverse removal procedure.
2,696 views
Usually answered in minutes!
×