I m in need of vacuum hose diagram for a 98 honda passport 4 wheel drive

SOURCE: fanbelt diagram for 98 honda passport

Check carefully under the hood. There should be a sticker under the hood in the engine compartment with a diagram of the belt routing. If you can't find it, check your owners manual (if u still have it), if all this fails, ask where u purchased the new belt, they would have access to that info. Good luck!

SOURCE: i need a diagram of how to put transmission in 98 honda passport

If you have an automatic transmission, you should take it to a mechanic or at least purchase the special fluid temperature gauge needed to do it right. You add fluid through the overfill screw opening found on the transmission fluid pan (there is no dipstick or underhood component on the 96' and later models). It should be located in one corner of the pan; there's also a drain plug is more toward the middle. Never open the overfill screw with the engine stopped - it should always be running and warm.

For a manual transmission, the fill plug is also on the pan, but it is located on the side.

honeymokey

• 3113 Answers
• Posted on May 10, 2009

SOURCE: Vacuum Leak on a 2000 Honda passport

Replace upper intake gaskets. They are made of metal and plastic. A common problem. Do not remove the very top plenum cover gasket.

SOURCE: vacumm hose diagram for 1987 honda accord

You did not clarify which motor you have. Here are both diagrams.

The fuel injected model:


And the carb model:

Testimonial: "Guru this is amazing I have to ask where did you find this I have been on the web for days and just couldn't find one till now --I bow down God Bless"

SOURCE: need Serpentine Belt Diagrams for 2001 honda

you can access most items @autozone.com, they have free manuals online. you will need to register and provide info about your car, it is FREE! what I pulled up is courtesy of autozone.com, this is for the 01 passport 3.2 2wd vehicle. the manuals will provide step by step instructions you can print off, good luck!