SOURCE: Instrument cluster not working and truck wont go
I had the same issue with my 2002 F250 7.3 L. The overdrive switch was shorting the circuit due to exposed wires in the steering colum. I replaced the switch and resolved the problem.
SOURCE: I have a 1997 Mercedes E320 and the instrument cluster guages
hello,good day,maybe your cluster nearly damage,send to your dealer,they have a testing procedure(simulation all the gauges), to determine if your cluster is defective,ty
SOURCE: pontiac 2003 aztec cluster panel not working
GM has a problem with clusters but the government nor GM will do a recall on the clusters. Check ur local yellow pages for a Speedometer fix company , if u cant find one hit me back and I can find one for you.. In Houston we pay $250 for the service.
SOURCE: instrument panel cluster gauges and odometer has stopped working
I had all my analog instrument panel gauges stop working after they did the state emissions test. I found the proper fuse in the fuse block located under the hood. Simply unplugged the fuse, noticed it was still good, and plugged the same fuse (10A) back in and all the gauges started working again. Guess it needed a reset atfer they plugged in for the emissions.
?€¢
The IPC determines that the system voltage is less than 11 volts or greater than 16 volts. The IPC receives a serial data message from the body control module (BCM) indicating the system voltage.
?€¢
The IPC performs the displays test at the start of each ignition cycle. The indicator illuminates for approximately 3 seconds.
?€¢
The ignition is on, with the engine off
63 views
Usually answered in minutes!
×