I just got a 2008 Rogue for my wife and our 14 month old. it whistled, when i hit the accelerator. so i brought it in. the dealership said i needed a new CVT, so they went and put it in. now that i have the car back with the new CVT, it vibrates, shudders like crazy between 5-35 mph (1000-1500 RPMs), it happens when my throttle position is at 10%, if more throttle is applied, it stops.. what the heck?? i never had this problem in the 9 days i had the car before the new CVT was put in... it never vibrated at all at these low speeds. ive looked online and see a lot of people having problems with 2008 Rogues and vibrations and CVT transmissions. the dealer service shop told me this is normal operation... but before i brought it in, it never vibrated, so how is this normal??? any help on this matter would be greatly appreciated.. thanks :)

SOURCE: ENGINE VIBRATION AT IDLE BUT OK WHILE DRIVING.

Could be any one, or more, of the following -

Plugged injector
Bad plug wire
Fouled plug
Crossed plug wires (hard to tell sometimes on V-8s that run smooth anyway)
Vacuum leak
Leaky EGR valve
Shifted timing sensor

Scan engine for codes and proceed from there.

There is a product called RXP (available here in Texas) that will clean up an engine and gas. Its pretty awesome stuff, and this coming from a person who doesn't really believe in additives.

SOURCE: Nasty vibration on the floor under the gas pedal

check the drive shaft between the intermediate transmission and the front transmission for miss alignement and defectivness of the telescopics system of this shaft. we had about the same problem on our 1996 same model...

ROBERT GARCIA

• 926 Answers
• Posted on Apr 20, 2009

SOURCE: Vibration on acceleration

when some vheel missing weight , the vibration begins at 40-45 mph, now if begins at any moment of acceleration ,check inner drive shafts , no outer joints

SOURCE: AUTO: Vibration in front end of Nissan Altima

the problem could be a bearing on the drive shaft and not hub drive the car and see if u can hear a humming noise for the front also check and see if the front wheel is lose from the center nut if so the bearing in the hub is on the way out . is best to have some one change it as it needs to be pressed out { the old} and in the new . wit the drive shaft on the inner part of it their is an inner joint .this joint can wear and cause the steering wheel to virbate like if the wheels are out of blance not too pricey to do still best to have a pro to do it . best try the steps i provide here to find ur self as 9 time out of 10 u go to a dealer wit one problem and come out wit another . best of luck