1999 nissan quest rear brake shoes need changing

Help is here:
http://autos.groups.yahoo.com/group/villagerquest/

Drum Removal

1. Remove the rear wheel and the tire assembly. Refer to Section 204-04 .

1. Retract the brake shoes and loosen the brake adjuster screw.

1. Remove the brake drum.

----------------------
May require big hammer to loosen drum from axle flange. Hit between the the lugs, not on them.

------------------------------------------------------------------------------
#10 is access plug to back off adjusting wheel.
<1999 nissan quest rear brake shoes need changing - f9f31b5.gif src="/uploads/images/f9f31b5.gif" alt="f9f31b5.gif" class="h_mi" />
Item Part Number Description 1 2261 Rear wheel cylinder 2 — Dust boot (part of 2128) 3 2197 Wheel cylinder piston (part of 2261) 4 — Cup (part of 2128) 5 2204 Wheel cylinder piston cup spring (part of 2128) 6 — Wheel cylinder housing (part of 2261) 7 — Brake shoe hold-down pin 8 — Access hole (part of 2212) 9 — Rear brake bleeder screw (part of 2261) 10 — Access hole plug 11 — Rear wheel cylinder bolt 12 2212 Rear brake backing plate 13 — Rear brake backing plate bolts 14 2N790 Parking brake lever clip 15 — Spring washer 16 — Secondary brake shoe and lining (part of 2200) 17 — Brake shoe hold-down spring (part of 2B514) 18 — Lower retracting spring (part of 2B514) 19 2A637 Parking brake lever 20 — Parking brake lever pin 21 2A177 Brake shoe adjusting lever 22 — Adjuster lever pin (part of 2A177) 23 — Primary brake shoe and lining (part of 2200) 24 — Upper retracting spring (part of 2B514) 25 2041 Brake adjuster screw

--------------
Shoes Removal

Take a picture and remember how each part goes and attaches

1. Remove the brake drum, refer to Drum in this section.

1. Remove the upper retracting spring.

1. Remove the lower retracting spring.

Remove the self-adjuster.

1. Remove the hold-down springs.

1. Remove the parking brake lever clip and the parking brake lever.