Replaced old lamp still don't work
High beam or low beam? or both of them on one side.
SOURCE: replace passenger side low beam bulb in a 2003 lincoln aviator
Open hood and remove the radiator site shield and the air delector on top of the headlamp assembly. You will then see 2 clips that you will pull up and then remove the headlamp assembly.
SOURCE: Replace headlight
Remove coolant overflow bottle and windshield washer bottle neck (by turning neck counterclockwise about 3/4 inch and pulling up on it). That will open up the light bulb area. Nissan has a headlamp campaign, where bulbs get replaced for free to you and in some cases the whole headlamp gets replaced, bacause of the plastic falling apart, where bulb sits. Check with your dealer if the campaign is open on you vehicle. FREE
SOURCE: How do I replace my 2003 Acura TL passenger headlight assembly?
You will have to remove the front bumper to get to the bolts that hold the head light on
I would not recommend you try this unless you have some experience with this type of work
SOURCE: I need to replace the headlight assembly on a 1999
I just popped one of mine off this evening looking for the fan relay. 10mm socket. One bolt at the top, 3 nuts behind each lamp. You may need to take the air intake out to get access to the nuts on the drivers side. That is another 3 10mm bolts, 2 of which you need to take out to get to the air filter anyway.
SOURCE: need to remove headlight 2003 infinity g35 sedan
yes ballast is on the bottom of the headlight capsule. remove and note 4 torx heads
723 views
Usually answered in minutes!
2003 lincoln Navigator passenger headlight low beam don't work, replaced old lamp still don't work
×