At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Volkswagen Fox Fuel Pumps are located inside your gas tank; being as liquid gasoline is not combustible, this is the best position for installation. Your car's Volkswagen Fox Fuel Pump is an apparatus that operates to move fuel out of the tank to the motor. Your car's Volkswagen Fox Fuel Pump pressurizes the fuel system to move gas from the fuel tank to the engine.
Bring it into VW the shifter has to be reset and the hard plastic bushing that make the shifter work have to be replaced. There is a special toolVW uses to reset the shifter on these vehicles NOT ALL SHOPS HAVE IT. This is a no brainer. If the Dealer is gonna ask a fortune to repair it(Which they shouldn't) You can purchase this tool on line and with the shop manual you can do this yourself.
These CIS vehicle are tempermental. Best thing to do is change the air filter, clean air flow sensor plate(Spray gunout on a rag and lightly clean it ) Gun out throttle body and a slight idle adjustment. Finallyonce a month put some fuel injection cleaner in the tank. See how this works before we start testing items.
The battery cable and the cable from the alternator go to the large terminal, with the 13mm nut on it. The small plug goes to the spade connector to the right.
Try testing the switch and then the relay. Usually its the switch. Use a flat screw driver to pull it s out of there connector. Use a jumper wire and shop manual to jump the terminals and see if the lights come on. If they do its the switch.
The relay you check for continuity and resistance.
how much oil does my volkswagon fox take???
i need the motor oil capicity for my 1990 volkswagon fox 1.8 liter
×