SOURCE: valve clearance
Hello, For all 615, 616 (4cyl) and 617 (5cyl) through 1985 model year is:
cold intake 0.10mm or .006in
exhaust 0.35mm or .014in
hot intake 0.15mm or .007in
exhaust 0.40mm or .016in
CYA, Gator241
SOURCE: Valve tappet adjustment
well, I can see ur message has been here for quite some time. Most probably you got the answer to ur request.
I just did the valve clearance on the engine of my SJ413 that has the 1000cc engine of an SJ410 :
When cold: 0.13mm Intake and 0.18mm Exhaust
Engine sounded well and worked fine after that.
Enjoy
Mehdi
SOURCE: need to check tappet clearance on car
forget book set intake at 10 exhaust same use 20/50 oil hey vote for me ok
SOURCE: need tappet clearance settings for 88 nissan
both engines on these sentras are hydraulic and no adjustment is necessary. if youre getting some tapping noise, try a good engine flush and idle till the noise goes away. the last time i did one of these, it took 2 hours for the noise to cease. drain the oil and use a nissan oil filter and probably 10w 40 oil. you should be fine. cheap fix huh?
Testimonial: "cheers for the advice bud, did a bit more homework on it adjustable tappets on E16 engines set at 10 thou. oil change made it a bit quieter to."
1,267 views
Usually answered in minutes!
×