What is P0339 code for a 2007 Honda Accord - Honda Cars & Trucks

0339 is intermittand crank position pulses. That'll do it!
Check for bad connections/replace the sensor if faulty.

Is the replacement radio identical to the original? If it is, then were you able to confirm the replacement radio was working?

Cory and Ray, Check the attached links,instruction and guides on AC fuse location. Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
How to diagnosis and change the fuse of Honda Accord 2007
2007 Honda Accord Sedan AC fuse Google Search
Is diagram of 2007 honda accord fuse panel available online

p0339 is crank shaft position sensor related error. you need to be sure that its wiring is not damaged and it is not shorted somehow. if it is broken or getting broken, car may stall, or wont start att all.

p0113 is for intake air tempoerature sensor errors. that sensor measures air ehich enters the engine. it is least important. its effect may not be noticable when weather is not extremely cold.

p0334 is for knock sensor on engine. it prevent predetonation due to ignition conditions appear. it is felt when engine is under load like climbing, and engine speed is low. check for wires if it is ok replace sensor.

we can tell that temperature sensor is not directly effects other sensors.
but knock sensor and crank position sensor is to important for engine. if you have no starting issues, even cold or warm engine, invest on knock sensor first.

if it's not in your glove box you will have to take the radio out and get the number off of it and call the dealer.










TIM..........

HONDA do not make radios .They only affix their badge onto
radios made by the large manufacturers (ALPINE , BLAUPUNKT etc).

First try https://radio-navicode.honda.com/
If so , then if the above suggestion is not successful ,then unfortunately the code will not be available for free (or cheap ) from anywhere on the Internet.

Main Dealer or a Decoding Service only

Code 23 is the knock sensor,but this does not mean the sensor is faulty,could be picking up a knocking in your engine.Check oil level and oil pressure.Check wiring to the ecu from the sensor.

How did you get the code? It doesn't show up on the check engine light list
http://www.engine-light-help.com/honda-check-engine-light.html

Time for oil change

Use the numeric buttons for your channel pre sets.