I changed my blend door actuatior on 01 silverado ,works but turn to cold blows hot !turn to hot blows cold!!! pulled fuse tried reset.??????
In addition to faulty actuator motors, the blend door itself can also be broken. This happened on my Tahoe. Typically it is a very labor intensive and costly fix to replace a broken blend door, as the dash must be removed and the plenum assembly replaced. There is a DIY kit from heatertreater.net that provides steel hardware as well as instructions on how to perform the repair by removing the glove box rather than the entire dash.
This is also an alternative to replacing the 'difficult to access' top actuator motor underneath the dash. The kit contains a single blend door which converts the dual control to single control, and is operated off of the bottom actuator motor, which can be accessed by removing the glovebox. If you are having issues with your blend door, or the 'top blend door actuator motor behind the dash' it is worth looking into.
Were the a/c blend door is located in 2002 chevy silverado
Most likely needs a LH (bottom) temp actuator. Located in the center of the dash on the bottom, you have to remove the hush panel on the rh side of the truck
5,568 views
Usually answered in minutes!
no vacuum doors .all elect. tried doing a reset pulled #1hvac fuse turn key on for 1 min .replace fuse , actuator still runs backwards.
Are there any vacuum doors involved?
×