Question about 1996 Jeep Grand Cherokee
Check the computer inputs and outputs voltages
Posted on Nov 05, 2013
Timing belt may have slipped. usually if the engine starts to back fire and then lose power the timing belt is loose. would check this and replace if it looks suspect. also timing belts should be changed at a certain time or miles witch ever is the grater. average is 4-6 years on a engine that don't do meany miles 2-4 years on a heavy run engine.
Posted on Oct 15, 2013
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
check for leaks in exhaust ahead of converter, check cap and rotor for tracking between contacts, code check for fuel and other faults.
Posted on Apr 26, 2009
These rear hatches have a cheesy rod and clip setup. You have to remove the panel from inside, you have to loosen the screws around the hatch and pull it away and reach in down toward the latch and open it that way so you can get the 2 screws out of the bottom easier. There is a peice of plastic in these that's a dust barrier, try not to tear it up too badly, and when you go to put it back, I use a spray adhesive to stick it back on while I put the panel back on. after you get it open you will see a rod with what looks like threads hanging there attached to nothing, and a little thing that has 2 notched areas and a clip to hold that rod into those 2 notches. bend the clip down to make it tighter and then force the rod back into place that should fix your problems. If that's all in place then it's the latch mechanism, usually they can't be fixed because parts aren't available, just have to buy a new one and put it in.
Posted on Aug 14, 2009
Testimonial: "Thanks very much, I'll give it a try. It's a bugger getting the inside panel off, I tried a few times unsucessfully."
SOURCE: intermitent electrical
Actually if the gauges work on and off and when they do go off usually you have no power windows as well.
Under your center console, unplug the airbag module and this should solve your problem
Posted on Sep 20, 2009
Tips for a great answer:
Dec 06, 2012 | 1996 Jeep Grand Cherokee
May 27, 2011 | 1997 Jeep Cherokee
Jul 29, 2010 | 1997 Jeep Grand Cherokee
May 05, 2010 | 1997 Pontiac Grand Am
Feb 26, 2010 | 1997 Jeep Grand Cherokee
Nov 06, 2009 | 1996 Jeep Grand Cherokee
Jun 23, 2009 | 1996 Jeep Grand Cherokee
Jun 19, 2009 | 1994 Jeep Grand Cherokee
Feb 23, 2009 | 1997 Jeep Grand Cherokee
151 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: