The passenger side mirror popped out of the housing and is still intact. How do I get it back on?
According to the factory service manual you need to first connect the mirror defogger terminals (if equipped). Next, line up the tab clips on the back of the mirror that fit into the slots of the mirror mount. Push in the bottom of the mirror fully and then use a cloth covered flat-tip screwdriver and place it between the top of the mirror and the mirror housing and press downward. This should engage the tab clips into their corresponding slots in the mount. When finished, check to see that the mirror adjusts properly. Sounds easy but I'll bet its tricky. I haven't done this repair before so write back with a comment and less us all know how it went.
2,320 views
Usually answered in minutes!
×