Power seat I cannot get the seat to go back

Power Seats System Description and Operation
Power Seat System Operation
There are 2 options of power seat systems available in full size trucks. The 6 way driver and passenger power seats, and 8 way driver and passenger power seats with driver memory. For the driver memory seat operation refer to Memory Seats Description and Operation . Power seats without memory are completely controlled through the power seat switch. Battery voltage is supplied to the power seat switch through the power seat circuit breaker. While the seat adjuster switches are in an inactive state the switch contacts are closed to the power seat switch ground circuit. When a power seat switch is pressed to an active state the switch contact is closed to the battery voltage supply circuit. Each seat adjuster motor is controlled by the power seat switch through 2 motor control circuits. The seat adjuster motors are bidirectional and the direction of adjuster motor rotation is determined by which of the adjuster motor control circuits is switched to battery voltage while the other remains grounded.


( I'm not good at wiring an running an ohm meter.) well then you need to take it to a qualified repair shop.

unplug it or pull fuse

Electronic's ! drivers Power seat module , driver door module . Do you know anything about automotive electronic's ?

The heated seat module (MSM) controls heated seat operation for both the driver and passenger seats. There are 2 modes of operation available for heated seats; both the seat cushion and seat back heat, or seat back only heat. When a heated seat temperature signal request is received, the MSM will activate both the seat cushion and seat back heating elements. When the heated seat BACK ONLY mode button is pressed once the MSM will deactivate the seat cushion heating element and leave the seat back heating element ON.
The adjustable pedal system is controlled by the memory seat module (MSM).
your best bet , have a qualified repair shop check it out ! Could have DTC'S - diagnostic trouble codes in door module , BCM etc...

Check the track from which the seat movers forward/ backward.Many a times something gets stuck up/ blocked in the track causing the problem.

On these case go with the solved problems related to these issue.

Click the link below and follow the procedure: -----

1994 Lexus GS300: Power seat will not go back?
http://howtobyme.blogspot.in/2012/05/1994-lexus-gs300-power-seat-will-not-go.html
--------------

POWER SEAT WILL NOT WORK?
http://alltypesofpartsreplacing.blogspot.com/2012/12/car-power-seat-electric-seatpower-seat.html
-----------
These will help.
Thanks.

On these case go with the solved problems related to these issue.

Click the link below and follow the procedure:-----
1994 Lexus GS300: Power seat will not go back? http://howtobyme.blogspot.in/2012/05/1994-lexus-gs300-power-seat-will-not-go.html

-----------
1997 Toyota Avalon: Power Seat will not Move back? http://whatisbyme.blogspot.in/2012/05/1997-toyota-avalon-power-seat-will-not.html

----------
1998 Chevrolet Corvette: Power Seat Control Now Working? http://schematicsdiagram.blogspot.in/2012/04/1998-chevrolet-corvette-power-seat.html

-----------
Power seat will not go Forward http://repairhelpcenter.blogspot.com/2012/10/power-seat-will-not-go-forward.html

-----------
Replacing power adjustable bucket seats to both heated and cooled seats?

http://schematicsdiagram.blogspot.com/2011/12/replacing-power-adjustable-bucket-seats.html

-------------
Volvo Seat Removal with Heated Seats? http://schematicsdiagram.blogspot.in/2012/07/volvo-seat-removal-with-heated-seats.html

-------------

How to Remove Rear seat on Rover 600? http://repairhelpcenter.blogspot.com/2012/01/there-are-3-10mm-bolts-at-back-of-seats.html

---------
How to remove Seat? http://repairhelpcenter.blogspot.com/2011/11/how-to-remove-seat-on-acura-integra.html

-----------
These will help.
Thanks.

that is easy find the motor under the seat that moves the seat back and forth take and neg wire and a hot wire carefully touch the twoo prongs going to the motor after diconnecting the plug going into the motor. it sould go forward one way and croos the wires to get it to go the other way if this works get a new switch and have a working seat.

You burned up the motor...???

only 4 bolts hold the seat in they may have a plastic cover on them that can be popped off with a screwdriver.remove the bolts and lean the seat back check the wires going to the motor and make sure it has power going to it.Don't know of any way to manually recline the seat without taking it apart.

If it is power seat electric motor is faulty. For mechanical you need to spray the rails under the seat. There is the grease at any autostore or Walmart for unscrewing rusty bolts. It will be helpfull.After you do thet push seat forward and back afterwards.
It will go
Good Luck