97 pontiac sunfire 2.2 liter serpentine routing diagram needed

Pretty pictures here :>)

https://www.google.com/search?q=1996+Pontiac+Sunfire+serpentine+belt+diagram&tbm=isch&ved=2ahUKEwiZzurM_PryAhWynnIEHb9vAT4Q2-cCegQIABAA&oq=1996+Pontiac+Sunfire+serpentine+belt+diagram&gs_lcp=CgNpbWcQAzoFCAAQgAQ6BAgAEBg6BAgAEB5Q1EdYvqcBYP2yAWgAcAB4AIABkAGIAd8OkgEEMTkuMpgBAKABAaoBC2d3cy13aXotaW1nwAEB&sclient=img&ei=0MA-YZmmE7K9ytMPv9-F8AM&bih=937&biw=1920&rlz=1C1QJDB_enCA643CA644

..

Disconnect the negative battery cable with a ratchet and socket, read the serpentine belt routing diagram located under the hood, then release the serpentine belt tensioner using a ratchet and socket, and carefully remove the serpentine belt from all of the pulleys with your hands. 2 Install the new belt according the routing diagram, then ease the belt onto the belt tensioner pulley and tighten the tensioner with a ratchet and socket.3 Reconnect the battery cable and start the car to test the belt.

need to know the engine size and you should have a diagram for the belt routing under the hood. if the belt tensioner is faulty or one of the pulleys have seized .have those repaired first instead of putting on the belt again.9 out 10 it is a faulty part that is why you may have lost the belt.

The belt routing diagram will be under the hood as it is with all cars made in the USA

give these websites a try www.alldatadiy.com and www.autozone.com and drive belt diagram www.webcrawler.com wish you the best of luck Michigan Man.if all fails stop by your local library and get your hands on a Haynes auto repair manual for your car.

There are 2 engines for your Mazda 6, a 2.3 and a 3.0. Below are both diagrams:
2.3


3.0

10171018 <-part # for a belt routing label.
there should already be a belt routing label under the hood or on your core support with a picture :}

It has a picture of this under the hood

go to autozone.com and it will give you the belt diagram

i have a 97 sunfire with a 2.2 and a/c my sticker is intact would you like a pic?