SOURCE: IGNITION KEY DOESN'T WORK
You accidently tripped the anti theft deterrent that lock the whole ignition system when the worng key or a foriegn object is inserted into the slot. The only way to fix this, is to have it taken to a ford repair shop, since they will probably have to replace the whole steering collum.
SOURCE: 1996 Ford Explorer key to ignition switch loose
sound like the tumbler is falling out, when you open the steering column there should be a hole where a small but solid object can go in.. this release the tumbler but only when the key it turn at a certain position you will feel the pin in the hole go inwards then you can slide it out...it could be defective or just need to place back properly..hope this help..
SOURCE: Nissan Misral key stuck in ignitiion - car won't start
There has to be 12 volts in system for the key to release its electrical for it to release
SOURCE: key won't turn in the ignition
Yeah, the Fords are known for having to really crank on the steering wheel sometimes to get the key to turn, other than that......
SOURCE: Key tumbler loose. Starts car but wont turn off
most likely its the ignition cylnder (tumbler)
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/sean_54c3a3dc48a7773c
34 views
Usually answered in minutes!
×