I have a 5 door Aveo 1.5 and have messed up the new plug leads and have no idea in what order they should be fitted/installed - please helpI have a 5 door Aveo 1.5 and have messed up the new plug leads and have no idea in what order they should be fitted/installed - please help
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
When looking at the front of the vehicle. Cylinder 1 is all the way to the left (passenger side) then it progressives towards driver side. 1-2-3-4. As far as coils go, they are on driver side of the engine. So when looking at engine from front of car, starting closest to firewall, coil order should be 1 (closest to firewall) then 3, 2, and ending with 4. 4 being closest to radiator. Hope this helps. https://www.2carpros.com/questions/2007-chevrolet-aveo-ignition-firing-order-diagram
What engine does yours Have ? There are five different ones it could have !
1.2 , 1.4 dohc , 1.4 sohc , 1.5 an 1.6 L Does it have electronic throttle control ! Did you use the part # off the old one ! An give them the VIN # ?
The firing order is 1 2 3 4 with 1 being the passenger side. Aveos don't have distributors, so the other end of the wire shouldn't give you much trouble.
For the 1994 VW Golf: I do not know if you have the 1.8L SOHC In-Line 4-Cylinder or the 2.0L SOHC In-Line 4-Cylinder; however I have included both below:
For the 1.8L SOHC In-Line 4-Cylinder Firing Order: 1-3-4-2 Cylinders: ..........(back)......... |...1....2....3....4...|
..........(front) Distributor:
...(back)
(+)....1
...2.........3
........4...(+)-screw
For the 2.0L SOHC In-Line 4-Cylinder: Firing Order: 1-3-4-2 Cylinders: ..........(back).......... |...1....2....3....4...|
.........(front) Distributor:
......(back)
.....2.......1
(+)............(+)-screws
.....4.......3
......(front)
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!
For the 1996 Dodge Stratus: I do not know if you have the 2.0L SOHC In-Line 4-Cylinder, or the 2.4L DOHC In-Line 4-Cylinder or the 2.5L SOHC V6; however I have included all three below...
For the 2.0L SOHC AND 2.4L DOHC In-Line 4-Cylinder: Firing Order: 1-3-4-2 Cylinders: ..........(back)......... |...1....2....3....4...| .........(front) Ignition Coil: .....................o <---4 1---> o .....................O <---Connector 2---> o .....................o <---3
I have a 5 door Aveo 1.5 and have messed up the new plug leads and have no idea in what order they should be fitted/installed - please help
×