Check fuel filter first. rate as fixed if this helps.
Steel Midship, Aerostar
Removal and Installation
-
NOTE: Make sure fuel tank (9002) is properly supported during removal and installation procedures.
Drain fuel from fuel tank .
- Loosen fuel tank filler pipe clamp.
- Remove fuel tank heat shield (9A032) from vehicle.
- Support fuel tank .
- Remove bolt from rear fuel tank support strap (9092) and remove rear fuel tank support strap .
- Remove bolt from front fuel tank support strap and remove front fuel tank support strap .
- Partially lower fuel tank to gain access and remove feed and return lines from sender ports. To disconnect push connect fittings, refer to Push Connect Fittings in this section.
- Remove electrical connector from sender unit.
- Remove fuel vapor hose from evaporative emission valve (9B593) .
- Lower fuel tank from vehicle.
×