Changed the plug, wires and distributor cap now the truck wont' start at all. It is trying to start but won't fire. There is no spark going to the coil.How does this happen from changing only that? Thanks in advance for any help
SOURCE: 1995 Dodge Dakota Pick up
go to Didgeforums.com.
I had a similiar problem, found the solution there. It was the wiring harnes on the drivers side under the hood, just above the wheel well. there are a cluster of wires in a bundle. I unpacked the bundle carefuly and sure enough the were two or three wires all coroded, had wite powder from corosion. repaired the connections and bingo. I posted details at dodgeforums.com. browse around there. I posted pictures as well. this is a common problem.
SOURCE: 2001 Dodge Ram 1500 Won't Start
Have you checked the codes?
Mine was a faulty coil.... Twice. I made a heat shield for the second one.
SOURCE: truck has no spark changed fuel pump fuel filter
Odds are it is the $20.00 ignition control module but that may be another fluke change out of parts. LOL
SOURCE: 1997 Dodge Ram 1500 5.9 gas v8 engine. Lost Fire,
you have pcm problems or ASD relay problems.they both control the fuel and ignition.
SOURCE: dodge 98 ram 1500, .
I would take a look at the plugs and see if they are fouled. You might have a bad fuel pressure regulator. Also, the control module or pick up coil could be bad.
84 views
Usually answered in minutes!
×