SOURCE: CRUISE CONTROL
My 2003 Ram 1500, would not engage the cruise control, when the speed sensor on the rear axle, was the problem. The other symptoms, speedometer worked irregularly. Replaced speed sensor on top center of rear axle, and problem went away.
SOURCE: cruise control light will not come on after truck
After the light goes out does it come back on while driving down the road?
If it does this sounds as if you may have a heat sensitive problem at the cruise motor. this has a sensoe that turns the light on when it is engaged. when you turn it off and sits a while does the heat under the hood goes higher expanding the circuts an open circut. You may have to replace the board in the motor.
SOURCE: 1998 dodge ram 1500 Cruise control , speed
Look under the hood to check and make sure there is two steel wire cables connected to the throttle body. i had the same problem on my 02 dodge ram, turns out that just one of the cables came loose
SOURCE: 1996 Dodge Ram Cruise Control does not work
try checking the fuses first if the fuses are ok it will most likely be the switch itself to fix this requires removing the steering wheel do you have the tools to do this? if so let me know and I will give you the proceedure to do it.
Testimonial: "I have checked all the fuses on the panel by the drivers door. They are all good. I believe I have the tools for pulling the steering wheel. thank you"
162 views
Usually answered in minutes!
×