Six stud isuzu elf150 1994 light truck mfr,s specs for drum shoes & mfr's specs for drum plz.
SOURCE: 1996 toyota corolla rear drum brake (Australia)
to remove a stuck brake drum what I do is. there is a couple of holes in the drum a size 10mm nut screw hole. get two 10mm bolts screw it in the two OPPOSITE holes and screw in at the same time until the drum is free. we call this screws extractor. Check for any damage in the shoe and other parts because you are force extracting the drum
SOURCE: Chrysler Town & Country Minivan Rear Drum Brakes
remove tire remove center pin and nut if needed and any othe bolts then pull straight off. Make sure parking brake is released or drum will not come off.
SOURCE: exacly how to remove rear
The drum and hub are one assembly on that vehicle so you will need to remove the dust cap in the center of the drum and remove the large axle nut. The drum/hub/bearing assembly will then pull off of the spindle.
If you want to replace the drum you will either have to find one with a bearing already installed, Have your old bearing pressed out of the old drum and pressed into the new drum, or have new bearings pressed into the new drum.
When installing the new drum it is very important to tighten the axle nut to the proper spec. I can get that spec for you if you need it.
I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa
165 views
Usually answered in minutes!
×