I need to know the location of the cam sensor on a ford escape 2002 with the 3.0 liter V6 DOHC
SECTION 303-14: Electronic Engine Controls
2002 Escape Workshop Manual
REMOVAL AND INSTALLATION
Camshaft Position (CMP) Sensor —3.0L (4V)
Removal and Installation
#56 is the cam sensor. please rate as fixed if this is what you need.
Ineed to know the location of the cam sensor on a - 231ee68.gifmg src="/uploads/images/231ee68.gif" alt="231ee68.gif" class="h_mi" />
SOURCE: whats firing order diagram of 2002 ford escape v6
Ford V6's - rear bank of cylinders are 1 - 2 - 3. Front bank are 4 - 5 - 6 starting from passenger side (front) of engine.
Your firing order is
1 - 4 - 2 - 5 - 3 - 6
You're welcome.
SOURCE: location of the bank 1 sensor 2 O2 sensor on a 2001 ford escape
B1 means the sensor is located on the same bank of the engine that has the #1 cylinder. B2 is located on the opposite bank.
S1 means the sensor is located BEFORE the catalytic converter
S2 means the sensor is located AFTER the catalytic converter
You didn't say which engine you have, so I've included the diagrams of both 4 cyl and 6 cyl so you can see the banks
SOURCE: how to repair power steering pressure hose 2002
well first you go to salvage yard and hope they have 1 arround
unless you get luckey and it is the return hose that is low presure and can be fixed with a couple of hose clamps and a small piece of pipe
SOURCE: 2002 ford escape v6 misfire after washing engine
coil packs got wet take wires off and put dialectic grease in the boot ends
5,522 views
Usually answered in minutes!
×