Nice double post, back up one and read.
but now adds MANUAL.
so the reverse switch is bad, remove it ,2wire switch
and put in new.
its just a simple Thomas Edison switch, (no electronics) nothing magic. the FSM< covers this, (factory service manual) as does
alldata.com
if an OHM meter (resistance low range) shows infinity in reverse its bad, if reads 0 ohms its good, so if good, the wires to it were bad.
or both lamp out, (can happen, ignored)
SOURCE: 1998 suzuki esteem 1.6 will not start HELP!
Having good fuel pressure is a plus (yours seems a bit high but I don't have specs) What you need to find out is if the injectors are opening and putting the fuel into the engine so it can work. Are the plugs wet with fuel or dry? Does it fire up if you spray carb cleaner into the throttle body while cranking?
Testimonial: "thanks for quick reply..will pull plugs and inspect..wow what a great site!"
SOURCE: Engine pinning when accelerating only on cold Suzuki Baleno
Carbon build up on pistons raises engine compression.This is normal.Go up one grade on gas and/or put some fuel additive.If this doesnt solve it,have timing belt/chain inspected may need replaced
SOURCE: Is valve adjustment a part of normal maitenance on Suzuki Esteem
When you hear some tapping, that's why you need -valve adjustments. At 137,000miles you probably need more than that to continue your trouble-free drives.
SOURCE: how do i changing alternator suzuki esteem 2001
take it to a mechanic trust me, i had to replace mine after 6 days of trying to figure out how to remove the bottom bolt i took it to a shop if you need to know more email me [email protected]
SOURCE: Suzuki esteem 2000 1.8l wagon. Check engine light
need scanner ur car is obdll a few auto stores scan vehicles for free such as auto zone / advanced auto check ur area
175 views
Usually answered in minutes!
×