Acura tl 2008 i just took my car to the bodyshop to get it fixed. my radio started with error 1, error 2 and now its at Code Errore. what does that mean? i found my radio code. wont let me input it
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Is the code on the card correct, maybe a previous owner wrote it down wrong ? The code can be found on the left side of the glove box... on the left outside wall of your glove compartment after u open the compartment. Any good ?
Look for the code on the outer left side of the glove box, top number is the code, the bottom number is the serial. Just saved you some time and money. Now if you could explain how to get the radio to prompt code entry instead of error. Tried removing fuse under the hood and disconnecting the battery terminal to prompt code entry, to no avail.
You will have to go to dealer to have unlocked. The vehicle has built in theft lock system in radio. Most of them have code stored in radio that needs to be pulled before removing battery.
You have to do this: If you have jumped or replaced the battery at anytime this will happen. You have to get the serial number off the radio by removing it or partially taking it out to see the numbers on it try not to remove any cords. With the stereo out (to make sure you get the right number off of it) call an Acura dealership with the number and they will give you the another number to enter into the stereo and directions on how to punch the numbers in. Make sure while you have the stereo out you write the serial number down and keep it in a safe place also the number that the Acura dealership gives you because if you sell the car or if it happens again its easily accessible. Good Luck!
Press odometer reset/adjustment shaft in, hold in and turn key to run position. Keep holding in the reset shaft in for about 30 seconds. release shaft. turn key off. restart car. Service Light should go off in about 5 seconds.
×