Keyless entry system acting intermittent, replaced batteries in the key bob without any change. Now, the keyless system is not working.
SOURCE: can't find button under dash to reset/reprogram keyless entry
check this out - its not like the previous link - the button actually floats around with the wiring.
http://www.rs25.com/forums/showthread.php?s=8876327367f08262d9b387a75d9b5919&t=41265&page=2
SOURCE: 2007 Subaru Outback lock cylinder mutilated
Get a lock cylinder from a dealer and have it re-keyed to your key!
SOURCE: 2001 subaru impreza WRX unlocking doors with key
usually after opening the door you can deactivate the alarm by pushing th unlock button or simply insert keyy in ignition and turn it on.
SOURCE: Keyless entry of subaru imperza 2008 is not working
subaru have 2 security codes one for the key/ignition switch(magnetic code)and one for the remote(rolling electronic) the car is reccognising the key but not the remotes signal to the central locking.
try locking the car with the key then pressing and the holding the unlock button on the remote for 30 secs, see if the car unlocks.if not unlock the car etc....or... put key in door and hold over for 30 secs..etc
SOURCE: I disconnected my battery and now the flashers
I guess you can try removing the flasher relay for 1 second and see what happens. If this doesn't work then call the Dealership. They should tell you what to do if it was published in the owners manual.
Testimonial: "Thank You I will give this a try."
421 views
Usually answered in minutes!
×