Need torque settings for opel astra 1.6ie euro cillinder head

Question edited for clarity and correct order.

https://www.google.com/search?q=1996+Opel+Astra+Estate+1600i.+Torque+settings+on+mains+and+big+ends

..

Question edited for clarity, presume you mean torque settings?
Please don't type in all CAPS, it is considered SHOUTING.
Duplicate question deleted. Refresh page to see your question.


https://www.google.com/search?q=2014+OPEL+ASTRA+1.4+T-+A14NET.+HEAD+torque+SETTINGS

..

Some fixya user told me a website reliablestore it is very good.. I used it to repair my shredder it had some spark issue which wasn't easily fixed. you can go there and try

Using new bolts the sequence is :-
stage 1. 25Nm (18lbf ft)
stage 2. Angle tighten 90 degrees
stage3. Angle tighten another 90 degrees
stage4. Angled tighten another 90 degrees
stage5. Angle tighten a further 45 degrees
these as same for 1.4. 1.6 and 1.8 engines but not 2.0

http://www.speedwayautoparts.com/Torque%20Table%20T1.pdf

Try this site

Hi want to know the head talk settings for 2007 1.8 opel astra ecoteck plz

Opel astra 160ie 93 model, what's the big end torgue specs on bolts

I cannot find a EL20B in my data,but all Astra listed had the same head sequence as shown:

10 6 2 3 7

9 5 1 4 8

the torque specs for the C20XE,C20NE,X20XEV were all
25nm(18lb/ft),-then 90 deg,-90deg,-90deg.
Z20LET were as above plus an additional 15deg.
Same data for smaller and larger engines(except a couple that were 45deg instead of 15)
Make sure that you replace the head bolts with new,they are torque to yield bolts that are designed to stretch to 'plastic' state,and should not be reused.
Put grease(graphite if you have it) under bolt heads and washers,oil the threads.
Usually the head sets come with the torque specs.
I hope this helps you.