2003 Honda Pilot clunking and squealing down highway

Loud Noise Unknown Origin - Ask the GM Technician - GM-Trucks.com

www.gm-trucks.com > ... > Ask the GM Technician

Jun 30, 2006 - 7 posts - ‎3 authors
I get a loud clunking, grinding noise while turning to the right only, and ... I moved the passenger side tire to the rear driver side just in case it ...

can bad wheel bearing/hub cause loud clunking noises?

www.jeepsunlimited.com/.../showthread.php?...loud-clunking-noises

Nov 12, 2009 - 14 posts - ‎6 authors
driving home, i noticed some metal clunking sounds coming from the front driversside. at ... hmmmm....if it's grinding, then probably a bearing.

Front Clunking sound when driving straight. - TDIClub Forums

forums.tdiclub.com > ... > VW MKIII-A3/B4 TDIs

Dec 21, 2011 - I have a sporadic clunking noise from the drivers side front end. '98 jetta ... If I try to coast it gets really louder and more pronounced. ... whirring orgrinding could be several things: wheel bearing, brake pads due to a caliper ...

Quick Guide to Diagnosing Differential & Driveline Noises ...

These trucks had a problem with tje ac commpressor clutch breaking i would recomend sliding under truck and looking closely at the ac clutch. also the idler pulleys tensioner and waterpump pulley as these are also problematic

YOU HAVE FRONT ENGINE MOUNT AT BRACKET AT TRANSAXLE AND YOU HAVE REAR MOUNT AT FIREWALL.

I'm no expert sounds like the cars going into some kind of limp home mode the clunk could be drop link ,engine mounts sound dangerous at 70.

could be cv booth starting to worn out

Could be a number of things. Strut, spring, sway bar, broken sway bar link. Need to do a visual inspection.

a clunking clanging noise sounds very much like your stabilizer bar end links and bushings. you have a thin rear "sway" bar on the rear of your odyssey. this can cause a whole lot of noise. grab each side and pull/push. if it feals loose, replace the end links and bushings.

have the rear chunk and front chunk checked out could have slack in gears.

its probably your sway bar end links, I had the same problem, I replaced both sides and the bushings and no more clunk noise

My 2003 F150 Supercrew would not engage in 4x4, it ended up being the shifting fork in the front end, cost me $200.