- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
forums.focaljet.com/.../510540-Help!-No-Dash-lights-Tail-lights-or-Tag-... May 2, 2006 - 11 posts
I have a 2002 Focus SE 4dr. I don't have any Dash lights,Tail lights or Tag lights. Everything else is working ... Join Date: Oct 2005; Posts: 838 ...
Are the front park lights operational? These are tied into the tail lights as well. If the front park lights are operational and the rear are not, suspect bad/burned out bulbs. If no park lights operational, suspect fuse or wiring
sometimes when one of your bulbs is out it does that to all off the start with your turn signal bulbs other wise its you regulater fuse located under the hood
The Tail lights and Instrument lights are usually on the same circuit so both will go out if the fuse for the circuit blows. Check for a blown fuse for this circuit and replace if out. If fuse continues to fail, check the tail light or side globes for a faulty globe and replace if necessary. Also check for any chafed wires that could be shorting to the body causing the fuse to blow.
dash lights, tail lights, park lights and plate lights do share the same source of power for pickups.
try to replace your dash light and tail light bulbs, it would probably solve your problem.
Very common issue is the lamp assembly (dealer item). They are very bad to ground back through the tail lamp filament, lights on the path has voltage on it and the lamp will not work.
if u have trailer plug check there for broken wire at plug elect.connection,if not,usually on trucks wire damage is at rear,if lights are working in frt.check elect.circuit from tail light housing going to frt
×