Radiator fan relay,2001 chrysler town country

Check the fuse and relay for the Front Blower. You can swap front the back to test the relay.

Fuse Box Diagram Chrysler Town & Country (2001-2007)

https://fuse-box.info > chrysler > chrysler-town-country...
Fuse box diagram (location and assignment of electrical fuses and relays) for Chrysler Town & Country (Voyager) (2001, 2002, 2003, 2004, 2005, 2006, 2007).
You visited this page on 29/01/22.

• 
  

  Fuse Box Diagram Chrysler

  https://fuse-box.info > Home > Chrysler
  Fuse box diagram (location and assignment of electrical fuses and relays) for Chrysler Town & Country (Voyager) (2001, 2002, 2003, 2004, 2005, 2006, 2007).

could be thermostat stuck close.fan relay,fan is working.

the relay is located down by the radiator on the left hand side. it is actully a cooling fan module and is a solid state relay so therefore can't be ohmed to check for continuity.it is about 2" square and is attached to the frame.

Check fuse for fan relay in fuse box under hood. If fuse is good then you need to replace fan relay sender to pass your inspection.

you should check the Radiator fan control relay circuit,it is located under the hook inside the fuse box. Check your fuse first.

Ok, Dont replace anything with out checking .....Pls check your wire Connction By Muilti Meter. I think your has loose Connection.

the radiator fan relay does not look like a relay at all. on this car is a solid state relay meaning there are no moving parts. it is a black plastic box with small metal rods sticking out of it in a grid (for cooling). it is located on the metal bumper (not the one you see from front of vehicle, the one behind it) you can get to it by removing the grill or just taking out the top screws and pulling it back.

Driver's side in the fuse/relay box under the hood.

If you are talking about the cooling fan relay for the radiator there is no low speed and high speed relay. There is only one relay and it is behind the grill revitted to the bumper rail. It is doesnt look like you typical relay.

You should the same relay in your vechile just swap it and see what happens.