What are the water pump torque specs?
SOURCE: Need Diagram of water pump on a 1998 Dodge Intrepid 2.7,
the water pump is timing chain driven and to replace it requires serious disassembly of the engine. it is a 13 + hour job and is not for the casual mechanic
SOURCE: 99 dodge intrepid specs
Inner main bearing cap bolts:
Torque to 15 ft-lbs, then rotate an additional 1/4 turn
Outer main (windage tray) bearing cap bolts:
Torque to 20 ft-lbs, then rotate an additional 1/4 turn
Main bearing cap cross bolts:
Torque to 250 in-lbs or 20.83 ft-lbs
Connecting road bearing cap nuts:
Torque to 20 ft-lbs, then rotate an additional 1/4 turn
SOURCE: 02 Dodge Ram 1500 4.7L oxygen sensor torque spec
Threads of new oxygen sensors are factory coated with anti-seize compound to aid in removal. DO NOT add any additional anti-seize compound to threads of a new oxygen sensor.
SOURCE: looking for water pump torque spec for dodge 318
Water pump attaching bolts: 30 ft-lb
Fan-to-water pump attaching bolts: 200 inch-pounds
SOURCE: Dodge Intrepid 1996 Water Pump Replacement Needs
a timing belt. the water pump uses it to turn it and you got to take it off to change the pump anyway so you might as well get a new one.also the hydralic timing belt tensioner should be replaced at the same time just to be sure.you will need anti freeze of course as well
268 views
Usually answered in minutes!
×