Western plows I have a western plow.my plow will go up and down side to side but the plow blade will not go all the way to the ground when I push the down button? What's the problem?

SOURCE: minute mount 2 fisher plow stopped working up down

there could be a flat spot in the motor that runs the blade

SOURCE: fisher plow that wont go up and sometime won't turn either way

did you try cleaning the solenoids for the plow? i think this would solve your problem

SOURCE: IS THERE A HEADLIGHT RELAY FOR HIGH/LOW BEAMS, OR

Headlights in my '03 Jeep Cherokee are through a relay, both both light's are on the same relay I believe.

I would be suspect of any added modules which drive the headlights. Hopefully, they didn't "splice" in, but used one with factory connectors, so you can remove the module and reconnect the connectors as the vehicle was shipped from the factory.

When it's all said and done, you really need a wiring diagram for the vehicle. I can get one for my Jeep at the local repository library. Don't know about your truck. You may be able to find a diagram through some hard searching on the www.

Let me know if you need someone to bounce thoughts off of.

SOURCE: with plow lights pluged in do not have low beam on

ca mention may be wrong un plug the 2 chk fuse and start overthen u no

SOURCE: wiring for western plow joystick

My western snow plow will not go up or left or right with joystick. I can use a screw driver and make contact on the silanoid and then move the cables with the joy stick and then it will work. I have relaced selinoid and contacts. any ideas? Stomped