SOURCE: I have 3 transmission trouble codes I need to
OK, GOT IT YES THE RANGE SELECTOR (THAT IS THE FORMAL NAME) SWITCH CAN CAUSE THIS ISSUE
SOURCE: Jeep Grand Cherokee Limited P0700 diagnostic problem
P0700 means there is a transmission fault code in the transmission controller. Since the transmission controller doesn't have a light attached, it tells the engine controller to turn the light on using this code. You'll have to access the transmission controller to further diagnose the problem.
SOURCE: I just want to find
Hi, you can see a full list of Jeep DTCs here: http://jsautosource.com/factory-manuals/dtc-definitions/full-list-of-all-definitions-for-dodge-chrystler-jeep-dtc-codes/
Your engine light will probably return immediately after clearing the codes until the P0700 is rectified. The 705 indicates your range sensor is out of adjustment or broken. The range sensor is mounted to the side of the transmission where the cable attaches. It may be adjustable. Normally, when the range sensor fails, the starter will not turn, because the sensor provides the park/neutral safety interlock to ensure the transmission is not in gear. Also, the range sensor usually includes the backup light switch. I usually adjust the sensor by putting the transmission in reverse, turning the key on, loosening the switch, and rotating it until the backup lights come on. Please let me know if you have questions and thanks for using FixYa.
Testimonial: "Good response; good info; many thanks ~Steve"
The transmission of
a vehicle which has suffered a transmission problem will
send the P0700 code to the vehicle engine control module (ECM)
P0705 Transmission Range Sensor Circuit Malfunction
Possible causes
- Open or short park/neutral position switch circuit
- Poor park/neutral position switch circuit connection
- Misadjusted park/neutral position switch
- Park/neutral position switch may be faulty
P0455. A code p0455 most likely means one or more of the
following has happened:
A loose or improperly affixed gas cap
A non-conforming gas cap (i.e. not factory/original brand)
Other leak or damaged piece in EVAP system
P1125 Accelerator Pedal Position (APP) System
P2125 Throttle/Pedal Position Sensor/Switch "E"
Circuit
P2138 Throttle possition sensor
714 views
Usually answered in minutes!
×