Hazard light fuse keeps blowing. When the fuse blows it takes out the hazard light and the turn signals. All other lights are working fine.
SOURCE: Turn Signals, hazard lights & instruments inop
must be the dash connection in the back, need to demount dash panel, and spray wd40 on the connections.
SOURCE: Have hazard lights but no running or turn signals
sounds like you need a combo flasher assembly..located in fuse block inside vehicle under steering column..there may be a plastic cover under dash you have to remove to see fuse block..large black relay that plugs into fuse block..if you pick up a new one,you will see what it looks like..available at dodge dealer..combo flasher or drl/signal relay
SOURCE: the turn signals/flashers and hazard lights on my
check the switch it self may have to replace if everything is good grounds powers and lights, you can use a jumper wire to provide power to a ligh and if it illuminates you know the circuit is good, test each circuit and if all working replace
SOURCE: Where is the Hazard/Turn Signal switch located in
2000 Dodge Intrepid 2.7L SFI DOHC 6cyl
The Flasher is located
front seating area, driver side, under left hand side
of instrument panel between junction block and brake
pedal.
Testimonial: "Yes, this was ver helpful. Thank You! PS. If that photo is the Lady that answered my question, OMG!!!!!!!!!!!!!!"
372 views
Usually answered in minutes!
×