At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Seat Leon >> Lights. - Turn the light switch to position 0. in the light switch lights up. http://www.seatia.com/secon-545.html
- Turn the ignition switch in the key-operated switch in the glove box to the position ON fig. 25. The driver is responsible for the proper position of the key-operated switch. You should deactivate the front passenger airbag only if you have to use a rear-facing child seat in exceptional cases.
http://www.seatia.com/secon-465.html
Not with out codes. Diesels tend to throw a lot of codes. One thing goes bad and drives the PCM crazy. When I get them, I read and write down the codes. Then erase them. See what comes back up. This is where I start.
I bet you have a bad spark plug or ignition coil (or distributor wire). It sounds like a cylinder is misfiring, causing the error message, then when it fires up again the code is cleared and the message goes away.
check and see if there's any other icons flashing on the dash other then the warning lights. it may also be that the warning light has blown or someone removed it so they could sell it. other then that all you can really do is check the book that came with the car for reasons that there's a warning beep or take it to a mechanic that has a scan tool with the software for that specific vehicle.
hallo check oil preassure (should be 2 bars/2000 rpm. at working temperature) if OK, check oil pressure sensor- change. if not OK could be bigger problem (leaks, bearings, or turbine problem..) marko
×