Replace ignition switch

SOURCE: need firing order on a 1996 dodge ram v8

The order should be stamped on your intake manifold right under the air cleaner.
My '97 1500, 5.2, 318 firing order is 1-8-4-3-6-5-7-2

Hope this helps

SOURCE: 2001 dodge ram 1500 v8 spark plug wire diagram

the firing order is 1 8 4 3 6 5 7 2 clockwise around the cap

SOURCE: hoe to Replace an alternator on a 1996 Dodge Ram Van 2500 3.9L V6

Remove negative battery cable.
Remove the electrical plug and wireing. Mark them.
Loosen the alternator pivot bolt.
Remove the bolt that attaches the alternator to the adjustment arm.
Rotate the alternator to loosen the drive belt and disengage the belt from the pulley. Be careful that any spacers that are used in mounting are kept with their original bolts. This will make correct reinstallation much easier.
While supporting the alternator remove the pivot bolt.
Remove the alternator from the vehicle.
Do the reverse procedure to install new alternator.

SOURCE: wHERE IS THE iat SENSOR ON A 2008 DODGE RAM 1500,4.7L V8

on the intake manifold passenger side near the front i think

SOURCE: ignition switch removal and replace how to on

lock and tumbler (key switch) remove steering wheel remove clockspring remove set screw remove switch...lower column ignition switch remove 2 screws and the rod unplug from harness replace in reverse just watch the rod placement