There will be fault codes if you use the correct scanner that has the right protocols for the car system
the problem will be faulty injectors ( squirting and not atomizing) or the fuel pressure is too low to crack the injectors
take it to an accredited specialist diesel shop for a proper diagnosis and quote
continue to use easy start and you will have more than a no start problem as that has the capability of blowing a rod through the sump
SOURCE: engine intermittently stumbles and stalls after taking off from stop
Take carborator cleaner. First take off the big hose on the front of your intake then press gas peddal to open up and then spray it inside this fixed my problem. Jerry
SOURCE: check engine light 2004 GMC Yukon
When my check engine light went on, it was a oxygen sensor
SOURCE: 2000 Gmc Yukon Denali wont start i changed fuel pump and filter
your getting too much air in chamber on igintion probly cause by a faulty intake and or a faulty tps (throttle positioning sensor) sounds like intake is sucking more air that fuel which is giving a bad air fuel mix in chamber also try checking your mass air could be faulty as well
SOURCE: vauxhall zafira overheating
It sounds to me like your thermosdate is not opening and it should be replaced.
733 views
Usually answered in minutes!
×