How do you test the transponder for an ignition switch

The switch on the column is a standard motor products US216 FOR THE IGNITION KEY CYLINDER IF THERE'S A TRANSPONDER KEY IT'S A STANDARD MOTOR PRODUCTS #US280///// WITHOUT THE TRANSPONDER IT'S A#US233LT IF THERE'S A TRANSPONDER IT MUST BE PROGRAMMED BY FORD OR A LOCKSMITH TO WORK GOOD LUCK STEPHEN

igntion switch ? you saying key and tumbler
thought it it is part of the igintion barrel

not much information out there on that question

with the barrel out might be one for a locksmith

you tube
Ignition removal for the Crown Victoria

Part 1 -How to Test the Starter Motor (Ford 4.6L, 5.4L)

troubleshootmyvehicle.com > Ford > 4.6L, 5.4L
Mar 2, 2011 - Page 1 of 3: How to test a BAD Starter (Ford 4.6L and 5.4L Pick Up and SUV). ... a BAD starter motor on your 4.6L or 5.4L V8 equipped car, pick up or SUV. ...and will turn over the engine; -OR-; The starter motor won't do a thing. ... Crown Victoria ... 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005.

Question: 1997 Crown Victoria Lx Cant Turn on and Cant ...

www.2carpros.com/.../question-1997-crown-victoria-lx-cant-turn-on-an...
May 26, 2014 - Ok so i put the keys in the car turn the key but seems to me it moves more ... 1997 Ford Crown Victoria • 4.6L V8 RWD Automatic • 99,625 miles ... Keywon't turn off accessories or turn car over and ignition cylinder turns too ...

New keys with cylinder may not have a transponder chip , or new keys will need to be programmed. you will require two keys equipped with proper transponder for your vehicle, and either new keys cloned with the old transponders. If you have lost the original keys , you will need someone to remove the original keys from the pcm , than marry the 2 new keys to the pcm. If you have an original key , try placing it by the lock cylinder when attempting to start with the key supplied with the new ignition cylinder.

It is missing a spring on that rod.

it sounds like the ignition cylinder has dropped a tumbler not sure of replacement procedure for ur car but it needs the ignition cylinder replaced

If nothing works including the lights, something happened between the battery and the fuse box.
There are some fuseable links between the battery and the starter solenoid or between the solenoid and the fuse box.
I'd start with the battery cables and look for those fuseable link wires.

have look at ur wires that is caming from the car in to the coil it self

try turning the steering wheel left and right while turning the key, sometimes when you park with your wheels turned it will lock the wheel and key. you may have to put a little force into turning the wheel, nothing that will make u sweat... hope this helps you and good luck!!!

IS THIS A 99 CROWN VIC? IF SO IS IT MISFIRING? IF THIS IS THE CASE YOU MORE THAN LICKLY NEED PLUG WIRES.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/terry_db4da071b7da3ac1