Where is the oil pressure sending unit located
On all 2.0L and 2.4L engines, the oil pressure sending unit switch
is located on the engine block, below the exhaust manifold, on the
firewall side. On all 2.5L engines, the oil pressure sending unit
switch is located on the engine block, below the front exhaust manifold
on the radiator side.
Hello
It is located right behind the intake,sticking straight up.If your sitting in your truck look right at the middle of ur windsheild it will be located right in that area on the engine
Thanks & Regards
SOURCE: where is the oil pressure sending unit located?
The pressure sending unit is located on the passenger side rear of the engine just above and slightly to the left of the filter and filter housing.
SOURCE: Can not find oil pressure sending unit on engine.
yes it will be on the lower part of the engine block. i believ on passenger side.
SOURCE: how to chang oil pressure sending unit on 1997 neon
Center of engine on block at the lower back.
SOURCE: Pontiac Bonneville(2000) oil pressure sending unit
The oil pressure sending unit is located behind the oil filter, Threaded into an aluminunm housing. It has wiring that plugs into the sending unit. The oil filter has to be removed and you will need a deep well socket and a 6 inch extension. Change the oil and the sending unit together.
SOURCE: oil pressure sending unit
Hi there;
Your looking foer the oil pressure sensor on the 2004 8.1L.
You will find it located directly behind the EGR valve threaded into the block just to the drivers side of the center bolt for the transmission to block connection.
Thanks
Farrout!
1,099 views
Usually answered in minutes!
×