At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Service engine soon or check engine light? Engine light needs scanned for codes. Service engine soon is for oil changes and such. To get rid of service lights, turn the key on, press the gas pedal three times within five seconds. The light will flash. turn the key off. it's reset. At least check or change the oil and filter though.
1. Turn the ignition key to the "ON" position without starting the engine. 2. Fully press and release the accelerator pedal three times within five seconds. 3. If the CHANGE OIL SOON indicator flashes two times, or the display reads "OIL LIFE INDEX RESETTING 100%" then the system is resetting. 4. Turn the ignition key to "OFF", and then start the vehicle. 5. If the CHANGE OIL SOON indicator comes on and stays on, or CHANGE OIL SOON is displayed then the system did not reset and repeat the procedure.
1. To reset the OIL LIFE indictor if equipped with a Trip Computer, press the TRIP MODE button until the light appears next to OIL LIFE. 2. Press and hold the trip RESET button until the oil life percentage changes to 99%.
DID YOU TURN ON IGNITION SWITCH ON AND SLOWLY DEPRESS AND RELEASE THE ACCELERATOR PEDAL 3 TIMES WITHIN 5 SECONDS.IT WILL TAKE LONGER TO RESET DETERMINE HOW LONG YOU LET THE OIL LIGHT STAY ON.WHEN YOU TURN ON SWITCH 5 SECONDS DEPRESS AND AND RELEASE ACCELERATOR 3 TIMES.IF DONT RESET.TURN OFF SWITCH.THEN TURN BACK ON.YOU MAY HAVE TO DO IT SEVERAL TIMES.LET SWITCH REST SOME TRY AGAIN.IT WILL TAKE A WHILE.WHEN EVER CHANGE OIL SOON LIGHT COME ON RESET IT THEN AND CHANGE OIL.DRIVE IT ON A WEEK OR TWO TAKES LONGER TO RESET.
How to Reset the GM Oil Life System After changing the engine oil, the system must be reset. 1. With the engine off, turn the ignition key to RUN. 2. Fully push and release the accelerator pedal slowly three times within five seconds. If the CHANGE OIL SOON light flashes, the system is resetting. 3. Turn the key to OFF, then start the vehicle. The oil life will change to 100 percent. If the CHANGE OIL SOON light comes back on, the system has not reset. Repeat the procedure.
Try this. With the key on and the engine not running push the gas peddle to the floor and release it three times then hold it to the floor until the oil light flashes. This should reset the oil indicator light. It should not take more than about 20 or 30 seconds.Good luck.
Turn your key to the on position wait until all of your indicater lamps do their thing . Then pump the gas pedal 3 times in rapid motion in less than 5 seconds. Wait until you see the change oil light start flashing. If this does not happen then turn the key off turn it on again and repeat the procedure.
i also changed the oil filter
×