I need to change the passenger side mirror. How do you remove the door panel?
Disconnect your negative battery cable. Locate and remove the screws
that hold your interior door handles in place (they may be hidden by
snap in, or snap on clips). Remove the interior door handles, then
disconnect the wire clips to the switches. Your panel is held in place
by snap in clips; use a small pry bar to pull them from the door (try
to get as close to, or directly under the clips to prevent them from
tearing out of the door panel). Once the clips are pulled, pull the
panel upward to remove it from the door.
Install in reverse.
If you don't have power windows you will have to remove the manual window crank. It is held in place by a clip on the back side of the base. To remove the clip, you will need a small hook (kind of like a knitting needle). Put the hook in behind the base, and grab the clip and pull it off. To replace it, slide the clip back on the window crank, and snap it back on the door.
×
SOURCE: 1998 safari van - removal of passenger internal door panel
You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. then you just remove the bolts to the mirror
SOURCE: how do I remove interior front door panel
You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. then just remove the bolts for the mirror
SOURCE: how to remove passenger door panel on 97 lesabre
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can remove the bolts holding the mirror on
SOURCE: Replace 2007 Toyota Rav4 super sport passenger side door mirror
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door
SOURCE: How to replace passenger side mirror on 2007 Camry
To remove mirror pry off inside triangle panel(black) which exposes 3 nuts which are removed with socket wrench. Detach wire harness and pull out mirror assembly. To replace insert new mirror screws thru assigned holes and reconnect wire harness and tighten nuts to snug. Push inside triangle panel back into place and you're done! It's that easy.
1,545 views
Usually answered in minutes!
×