Cars & Trucks Logo

Related Topics:

A
Anonymous Posted on Jan 09, 2014

Remove lower back seat nissan pintara trx

1990 pintara trx

5 Related Answers

Anonymous

  • 426 Answers
  • Posted on Nov 03, 2008

SOURCE: i have a 1990 nissan

If you have the original owners manual that previous owner has written the code in you will not need to replace radio otherwise you will need to replace it.Some times the code can be written on the outer case of the radio but not usualy.Vehicle is too old for that code to have been retained by manufacturer/dealership.Without that four digit code therse very little you can do but replace.

Ad

Cade Graham

  • 42 Answers
  • Posted on Jul 10, 2009

SOURCE: adjust clutch

That's probably because of the fact that they didn't make enough of that model of cars that they would put it on their website. That's what I would say. Just google clutch for australian Nissan Pintara and see what happens.

Anonymous

  • 1986 Answers
  • Posted on Sep 21, 2009

SOURCE: Removal of Front Door Handle Pintara Nissan

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge.

Anonymous

  • 507 Answers
  • Posted on Nov 05, 2009

SOURCE: Need to replace the front drivers seat in a 1990 Nissan Skyline

easy.Remove the mounting bolts at the front and rear of the seat 2 front,,2 rear seat should just come out

Anonymous

  • 1 Answer
  • Posted on Sep 04, 2010

SOURCE: My dad owns a 1990

when you are at the -C- display (you may have to wait up to 3 mins) press program button 5.

Use Up or Down buttons for first digit - Press 5 to store
Repeat for digits 2 3 & 4

Job done.

Now, can anyone advise me how to get the stock Cassette/ Radio out of the dash (replacing with CD player)?
[email protected]

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Differental ratio for 1990 nissan pintara

turn shaft 1 turn count other shaft turns
0helpful
1answer

Throttle body located

you can buy that from your nissan auto parts
1helpful
1answer

I need an accelerator cable for a Nissan Pintara 1990 2.4 ltr. manual

After market shop will be the cheapest or genuine from a dealer spares department.
7helpful
1answer

How too remove back seat in a 1995 Nissan Maxima

Rear
See Figures 3, 4, 5 and 6
  1. Remove the lower seat cushion by pulling straight up on the front portion and disengaging the clips. Then hinge the seat upward to release the rear clips.
03b6e0a.jpg

Fig. 3: Pull up on the front of the lower seat cushion and disengage the clips
  1. Remove upper rear seat back-to-chassis bolts.
77eb191.jpg

Fig. 4: Remove the bolts behind the center armrest ...

a796228.jpg

Fig. 5: ... and the bolts on the lower corners ...

fbf100a.jpg

Fig. 6: ... Then pull up on the seat to disengage the three clips on the top of the seat
  1. Remove rear seat back by tilting forward and pulling straight up.

To install:
  1. Install the lower seat cushion and torque the lower rear seat-to-chassis bolts to 15-20 ft. lbs. (21-26 Nm).
  2. Install the upper rear seat back cushion and torque the upper rear seat back-to-chassis bolts to 15-20 ft. lbs. (21-26 Nm)

Hope help with this (remember rated this).
0helpful
1answer

Need to replace the front drivers seat in a 1990 Nissan Skyline

easy.Remove the mounting bolts at the front and rear of the seat 2 front,,2 rear seat should just come out
3helpful
1answer

Removal of Front Door Handle Pintara Nissan

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge.
0helpful
1answer

Adjust clutch on nissan pintara (it dosn't give me the pintara option in the choose a category) 2 lt, 1990

That's probably because of the fact that they didn't make enough of that model of cars that they would put it on their website. That's what I would say. Just google clutch for australian Nissan Pintara and see what happens.
1helpful
1answer

Original radio

OK i just spent three hours with tha same problem really.
i removed casing around steering column done by removing 4 screws on the underside. the bottom half of the dash is also done up by a series of screws remove these also. Once bottom half of dash is removed there will be clips holding head unit in push these in and head unit should slide straight out. :)
Not finding what you are looking for?

53 views

Ask a Question

Usually answered in minutes!

Top Nissan Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...