Question about 1994 Dodge Caravan
Sliding door won't close
First you need to determine if the issue is a door sliding issue or a door latching issue. These are 2 separate problems.
If the car/van was in an accident-take it to the bodyman.
If the railing is dirty or has a nail, penny, etc in the way this would also cause problems.
If the latch is already closed on the door lick it can't engage since it is already 'latched'.
Isolate the problem - try again! TJ
Posted on May 29, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
2 possible solutions. First clean the door pin contacts(multiple spring loaded pins on door side and matching plate on body) with a scotch pad until shiny gold color again. Second the rear edge of the door should be 1mm inside the body opening when closed. If those are correct it is going to take a software download from a dealer to the door control module to fix this. Otherwise you will have to pull the psd fuse and breaker from the right side dash fuse box.
Posted on Jun 23, 2009
SOURCE: Power door is not delatching
there is a door lock actuator that has failed, it releases the latches so the door can open. you need to remove the door panel. unbolt the window and tape it as to hold the window up then remove the window regulator assembley then unbolt the lock actuator from the back side.
Posted on Apr 25, 2009
Tips for a great answer:
Oct 06, 2013 | 2006 Lincoln Zephyr
Jul 29, 2012 | 2003 Chevrolet TrailBlazer
Sep 04, 2011 | Kia Rondo Cars & Trucks
Mar 28, 2011 | 2000 Honda Odyssey
Jan 19, 2011 | 2005 Honda Odyssey
Dec 17, 2010 | 2005 Honda Odyssey
Dec 31, 2009 | 2002 Chrysler Town & Country
Dec 16, 2008 | 1999 Oldsmobile Silhouette
Oct 22, 2008 | 1998 Oldsmobile Silhouette
1,505 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: