How to change the thermostat
SOURCE: need to change thermostat and cant find it. where
GM Corsica/Beretta 1988-1996 Repair Guide
The thermostat is located inside a housing on the back of the cylinder
head. It is not necessary to remove the radiator hose from the
thermostat housing when removing the thermostat.
CAUTION
When draining the coolant, keep in mind that cats and dogs are
attracted by ethylene glycol antifreeze, and are quite likely to drink
any that is left in an uncovered container or in puddles on the ground.
This will prove fatal in sufficient quantity. Always drain the coolant
into a sealable container. Coolant should be reused unless it is
contaminated or several years old.
Fig. 1: Exploded view of the thermostat and housing assemblies - 2.0L and 2.2L engines
Fig. 3: On 1994 2.3L engines, the thermostat is located in the radiator outlet pipe
Fig. 4: Exploded view of the thermostat and water outlet - 2.2L and 3.1L (VIN T) engines
Fig. 5: Thermostat and coolant outlet mounting - 3.1L (VIN M) engine
I hope help you (remember rated this) Good luck.
Fig. 2: Exploded view of the thermostat, housing and related components -1990-93 2.3L engines
SOURCE: How do you change the thermostat in a 1999 malibu?
give these websites a try www.autozone.com and www.alldatadiy.com wish you the best of luck Michigan Man.
SOURCE: changing a thermostat on 2008 Chevy Impala 3.9L
There are two hoses that come from the radiator. The very bottom hose is conneted to the thermostat housing. Looking at the car from the front under the hood just below the first hose is another one same in diameter and there it is two bolts and you done.
SOURCE: how do i change thermostat
See picture below, thermostat is located on driver's side of engine. You will have to remove the alternator to get proper access to the thermostat.
1,793 views
Usually answered in minutes!
×