SOURCE: 2002 Nissan Frontier timing belt
Timing belts are found on the 3.3L engines, timing chains are on the 2.4L engines. The 2002 3.3L Timing belt is changed at 105K during the major service. This service can run over one thousand dollars. It is recommended to replace the belt, tensioner and idlers, cam and crank seals, water pump, and both belts when changing the timing belt. That way, you only open up the front of the engine every 105K. Why change the timing belt and have a water pump start leaking only 20K later and ruin the belt with antifreeze? Other items during the 105K are a major tune up with all the fluids changed and a lube. This does get expensive. You can break it up into several blocks of time and spread the related service items out over a few months to take some of the sting off.
SOURCE: Changing V belts on Nissan Frontier 2002 4cyl
That should be right if it is an idler pulley. On belts that do not have idler pulley you will have to loosen lock bolt on adjuster. Like alternator
SOURCE: 2006 Nissan frontier 4 cylinder belt diagram + tensioner pulley
They are under the hood or on the front crossmember.
Regards,
matt
SOURCE: change brake light bulb on a 2000 Nissan Frontier
The entire bed line will need to be removed. The long screws that hold the metal bracet where the bed extender attaches also hold the tail light assembly in place.
I pulled the bed liner up at a 45 degree angle and layed it on top of the cab. This revealed the screws. Take both screws out and lay to the side along with the metal bracket for the bed extender.
Now firmly grab the edges of the tail light assembly and pull...there are 2 hard rubber nipples that snap in to hold the assembly. You will feel like you might break it but you won't..just pull straight back hard. The assembly will "POP" out and then you can just twist the back of each bulb there are (3) and pull out..now you will see the bulbs..just pull the bad bulb straight out and push the new one into place. Now just reassemble. Total time will be 30-45 min. for this repair.
SOURCE: 2000 nissan frontier knock sensor code & distributor
no but the knock sensor does send a signal the ecm and it will ****** or advance the distributor timing
115 views
Usually answered in minutes!
×