Error Code: P0301
Description:
Cylinder 1 - Misfire Detected
Possible Cause:
Wiring.
Ignition system.
Fuel injectors.
Fuel pressure.
Running out of fuel.
EVAP canister purge valve.
Evaporative emission system.
Low compression.
Base engine problems.
Engine control module (ECM).
Error Code: P0302
Description:
Cylinder 2 - Misfire Detected
Possible Cause:
Wiring.
Ignition system.
Fuel injectors.
Fuel pressure.
Running out of fuel.
EVAP canister purge valve.
Evaporative emission system.
Low compression.
Base engine problems.
Engine control module (ECM).
Error Code: P1300
Description: Random Misfire
Possible Cause:
As above.
SOURCE: 1996 honda accord p0302, p0304 & p1300
Go to this site: http://www.engine-light-help.com/generic-check-engine-light-codes.html
Your 'generic' codes are there for OBD-II
SOURCE: My 96 honda accord is giving me three different
I would start with a full tune up. If it has never been done then that is the best way to start. Make sure that you gap your plugs. NGK plugs are the best for any and all Honda's. Let us know how it goes.
SOURCE: I have several codes P0301, P0302, P1300, &
I've been doing a lot of reading on this code, and I've done the parts replacing as suggested. The thing that is kinda strange is no one has ever mentioned the condition of the spark plugs. I changed the plugs out tell weeks ago and they looked like they were coated in this crusty white powdery substance. Today I rechecked the spark plugs and the plugs were starting to get covered in that substance again. I believe this is the root cause of these p1399, p0301, p0300, p0303, and p0302 codes. My question is, what would cause this fouling of the plugs?. Are the plugs too cold or too hot even. I went with an iridium tipped plug. Was that a bad choice? I seafoamed the engine in hopes of cleaning the fuel system a little. Im kinda baffled with this. I've got this weird feeling its got something to do with the fuel system and its not an electrical problem. Cause, correct me if i'm wrong, but spark plugs wont fire well if they're fouled?
SOURCE: 1996 honda accord OBD 2 trouble codes p0302, p0304 & p1300
here is the code table: code table, hope it can help you
1,404 views
Usually answered in minutes!
×