Both the brake light and abs light are on on my 96 jimmy sle 4x4. When driving it feels like emergency brake still on. what do i do?
Thats a big possibility. The abs light is on telling the driver the abs system is disabled. And the regular brake light could be on because the parking brake is not released.
Brake lights are controlled by a switch on the brake pedal. Switch needs to be adjusted or replaced.
Hope this helps.
SOURCE: ABS Problem in my 2000 Jimmy 4x4
the best way to diagnose this problem would be with a scan tool while driving and watching the speed sensors, or check all your wheel tone rings make sure there are no cracks and they are clean, also have the computer scaned for abs codes there should be a code that may tell you which wheel speed sensor is acting up,you can also check the wiring, these seem to chaf the wiring by the control arm .a bad wheel bearing may also cause this problem, i would start with a scan of the abs system,good luck.
SOURCE: 2001 Jimmy ABS and brakes lights came on
I hate to say it, but the abs control module might have died on you. Thats the boxy looking thing under the hood that has a lot of brake lines and wire connectors going into it. I have seen this happen before and it ended up being one of the speed sensors on the wheels but usually its the module. Take the truck somewhere to get the light scanned, and that will give you a better idea of what it is.
SOURCE: should the abs light that is on in my 1994 4x4
possibly if a abs valve is stuck closed with pressure in it
SOURCE: brake lights not working on 96 gmc jimmy
check fuse
if fuse is good check brake pedal switch
check grounds
592 views
Usually answered in minutes!
×