Horn goes off by itself when cold in my chrysler sebring touring

Question edited to add maker.
Question moved from MISC to model category.

Unfortunately no one knows what a 'panel pivot sensor' is.

https://www.google.com/search?q=2008+Sebring+Touring+Convertible.+Location+of+%22panel+pivot+sensor%22

There is some convertible in this link

https://www.google.com/search?q=2008+Sebring+Touring+Convertible.+Location+of+panel+pivot+sensor

....

What's the code? Or do you want us to guess?

There is no horn relay..

If it usually starts when cold, but when fails hot will not start until totally cold, suspect bad coil, ignition module or other electronic sensor on engine such as crank or cam sensor. Testing individual parts often is difficult, because part only fails when hot.

Do I need to remove the front number to get to the horn. Chrysler Sebring convertible. 2008

horn relay, or horn button faulty.

Not a solve but please call 18002479753. This is the number to Chrysler log complaint with enough complaints a recall will be issued.

FIrst off the horn's ground works through the steering wheel,so the wire is bare or the end is broken and grounding in a place where it should not. You will have to check the wires for the horn from the fuse box up to the wheel.
your power feed to the headlights and the door locks has an open ( the power is not connected somewhere ) Perform a wiggle test turn on the headlights and lift the hood,find the power distribution box and begin to wiggle the wire harness.Sometimes the chrysler fuse box under the hood get loose inside the power distribution box,it will have to be broken down all the way to the heavy wires comming out of hte box,you can tighten these connections your self.

remove the horn relay its in the power distribution box...