At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I have a Volvo XC90, left hand drive. Is it possible to change the dipped headlights from right to left for use in the UK. Or do I need a new headlight set?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Yes they should be adjustable because people change tyre profiles front to rear and this alters the drive angle.The adjustment screws are in the headlamp housing behind lamps accessed from the hood/ bonnet side.you do need to do this properly so they align together at the legal height for full beam.there is plenty of online information on the correct height for full beam...once you have made sure all Your tyres are at the right pressure....park on level ground ...at least 3 meters from front of a wall ....and at right angles to the wall....measure the height to the centre of headlight to ground .......mark the right light horizontal line for correct height on the wall and make sure you put lights on full beam....they should shine slightly below (say an inch )to the marked the measurement of height of lamp on the vehicle....adjust until the right hand light horizon is an inch below...now mark vertical line to cross centre of reflected light....this will give you a register point to mark where the left light should fall ...this will be exact distance apart as on vehicle and again adjust left until it falls below 1inch of the measured height line of lamp on car......mark distance from right to left light and mark the same height in chalk....then adjust left light to pinpoint marked chalk cross.adjust the beams by turning the spring loaded screws behind the lights.once you are happy check dipped positions....on right hand drive the lights should dip below and left.left hand drive dip below and right.you probably didn't need so much info but ...hey it's free and it saves any misunderstanding.hope this is of help...please vote.thankyou.
There are two adjusting screws on the back of each headlight, as a rough check for the alignment, on flat ground, drive the vehicle right up to a wall, mark the centre of the light on the wall, reverse the car straight back about ten feet. Switch on main beam and the beam should shine straight at the mark you made on the wall. Dip the lights the beam should drop and go left by about two inches (UK). Left hand drive the beam should go to the right and down (US).
why not do as yiou would if you were in the uk as if you were going to france say and fit tape to the head light to change the direction of the beam the when you return go to the local car breakers or e bay and get a set of head lamps also 1 other thing drive on the left. lol
Unfortunately you cannot. The beam pattern itself is different. On left hand drive cars, the actual beam is designed to throw the least amount of light into oncoming cars and will look something like this. _________ ________/
you can't change the pattern as the housing unit itself is what depicts the pattern projected.
Hi! I have already changed one.
1. Open engine hood
2. take the headlight unit out (pull out two hooks)
3. you have to disconnect the unit's electric wire (use a screwdriver)
3. change the bulb - it's place lower size of headlight unit (If I remember right, it is a W5W bulb)
4. reassemble :-)
×