Front hub nut & four bolts that hold baring
SOURCE: Front Hub Bearing Torque specs to complete replacement
THE LUG NUT TORQUE SPEC - 140FT/LBS\
CALIPER MOUNT - 80FT/LBS
CALIPER BRACKET 129FT/LBS
AXLE NUT 177FT/LBS
SOURCE: Replacing front wheel hub assembly on 2006
Caliper mount bolts are 74 ft/lbs
Driveshaft axle nut is 177 ft/lbs
Hub and bearing mounting bolts are 133 ft/lbs
Testimonial: "The info on the torgue specs was very helpful. I couldn't find it anywhere. Thanks a bunch!"
SOURCE: replacing front wheel barings on a 2005 chev
the big one tighten with a big bar and pull it to about 120lbs ,the three smaller ones which i cannot place at the moment but if they are 17mm size heads then about 60 but i always feel them as i do them and never use a torque wrench or a air wrench ,just muscle and 40yrs of feel
SOURCE: I' m looking for the torque specs for a front hub
i have a 2002 HD and the deal told me 177 ft. lbs. good luck
SOURCE: Torque Specs to replace front wheel bearing hub in a 2006 Equinox
Three bolts are 70 lbs,could be 120+/-.
Testimonial: "Thank you for such a fast response! Very helpful...!"
5,117 views
Usually answered in minutes!
×